This custom EchoTAP™ delay has a TAP Tempo echo and a Panel settable echo that the musician can switch between on the fly. The TAP Tempo can be set from 30ms to 3 seconds; the panel echo can be set from 50ms to 3 seconds. The TAP tempo and the Panel set echo have their own separate ECHO VOLUME controls. This is useful because many musicians use two different echoes and volumes during a single composition. The TONE control shapes the echoes from crystal clear replications to spacey echoes like the older tape echo units. The EchoTAP™ has two inputs and two outputs for use in stereo in/out, mono in/stereo out, or mono in/mono out (all Inputs and outputs utilize True Bypass switching). As in all DLS™ units, we use the analog instrument signal and mix it with the echo signals (this leaves your instrument sound and tone as is).
-True Bypass Switching! -Two Echoes in One. (One TAP settable echo, one Panel settable echo, -Both echoes are independently settable for up to 3 seconds long!) -Both echoes can be switched between on the fly. -Individual TAP echo volume, and Panel echo volume controls. -Tone control for the echoes to achieve the multitude of delay sounds. -Repeat control (Controls a single repeat to many repeats). -Two inputs and Two outputs so the musician can use (Stereo in:Stereo out) or (Mono in:Stereo out), or (Mono in:Mono out). -Analog instrument signal is maintained and mixed with the echoes. -Extremely warm sounding and versatile. -All steel enclosure, steel pots, and steel jacks. -Powder coated enclosure (more durable than standard painting). -9vdc input, any polarity (Worry free if using your 9volt pedal board supply). -Designed and manufactured in the USA by engineers who are also musicians. -Every effect is tested by an engineer/musician. -Internal adjustment pots for Inputs and Output level
Controls: Echo-1 Delay Time: 16 positions of most popular fixed delay settings from 50ms to 3 seconds. Echo-1 Volume: Volume of echoes while using Echo1. Tap Tempo: User settable tap tempo delay time from 30ms to 3 seconds. (Tap switch adjustable) Tap Volume: Volume of echoes while using Tap Tempo. Echo Repeats: Adjusts the number of echo repeats (counter-clockwise is least repeats, clockwise is most repeats) Echo Tone: Tone adjustment for the echoes only. (counter-clockwise the tone is the brightest, clockwise the tone is cut (low tone). Echo-1/Tap Tempo Footswitch: Switches between Echo1 fixed delay setting, or Tap Tempo delay mode. On/Off Footswitch: Switches between effect On (echoes) or effect Off (true bypass).
Electronics: Technology: Hi Quality Analog (HQA) electronics and 16bit digital electronics Sample Rate: 44.1kHz, 256x oversample. Power: "+9vdc" Input for 9 to 13.8vdc, 90ma minimum, 2.1mm jack
*Our internal circuit will accommodate any polarity of input jack.
Mechanical: Enclosure: Solid heavy gauge steel 5.5”W x 4.9”D x 2.4"H, powder coat painted for durability! Controls: Steel switches, pots, and ¼” jacks Weight: 2½ lbs.