Email senden   Tel. 0049 681 5898 564   Mein Konto  Versandkosten   Einkaufswagen 0,00


 DPC-8EZ GEN3 8-Loop Pedalboard Controller with MIDI
Artikel bestellen

Disaster Area Designs

DPC-8EZ GEN3 8-Loop Pedalboard Controller with MIDI

Art.Nr. 1799

€ 439,00

inkl. ges. MwSt., zzgl. Versandkosten


Versand Inland (Germany) € 5,90
Versandkosten international

Auf Lager


Einkaufswagen
Herstellerinformation
Allgemeine Sicherheitshinweise -Lesen Sie vor der Inbetriebnahme des Geräts die Bedienungsanleitung sorgfältig durch -Verwenden Sie eine für das Gerät geeignete Stromversorgung mit einzelgalvanischer Trennung -Bewahren Sie die Bedienungsanleitung für das Gerät sorgfältig auf -Verwenden Sie das Gerät nur für den dafür vorgesehenen Zweck -Das Gerät darf auf keinen Fall Wasser, Feuchtigkeit und extremen Temperaturen ausgesetzt werden -Drehen Sie alle Regler am Gerät vor der Inbetriebnahme auf die jeweilige Minimaleinstellung -Bewahren Sie das Gerät außerhalb der Reichweite von Kindern auf Elektrische Sicherheit -Vergewissern Sie sich, dass das Gerät für die Spannung in Ihrem Stromnetz ausgelegt ist -Verwenden Sie entweder das mitgelieferte Netzteil oder eine gleichwertige, von Fachleuten empfohlene Stromversorgung mit einzelgalvanischer Trennung -Bei längerer Nichtbenutzung sollte das Gerät von der Stromzufuhr getrennt werden -Bei Beschädigungen des Netzkabel ist von einer Benutzung des Gerätes abzusehen -Reparaturen am Netzkabel, der Stromzufuhr oder dem Gerät selbst dürfen ausschließlich von geschultem Fachpersonal durchgeführt werden -Sollte das Gerät mit Flüssigkeiten in Kontakt gekommen sein, besteht das Risiko eines elektrischen Schlages Hinweise zur Reparatur -Reparaturen dürfen ausschließlich von qualifiziertem Fachpersonal durchgeführt werden -Selbständiges Öffnen oder der Versuch einer Reparatur des Geräts führt kann eventuell zu schweren Verletzungen oder Schäden am Gerät führen und hat zur Folge, dass die Garantieleistung erlischt -Wenden Sie sich bei Funktionsstörungen oder Defekten an einen autorisierten Service-Techniker oder an den Verkäufer Warnhinweise -Öffnen Sie das Gerät nicht. Es enthält keine vom Benutzer zu wartenden Teile -Vorhandene Lüftungsschlitze am Gerät dürfen nicht blockiert sein, da ansonsten eine Überhitzung des Geräts und etwaige Folgeschäden drohen -Verwenden Sie das Gerät nicht in der Nähe von leicht entflammbaren Materialien oder Flüssigkeiten -Vermeiden Sie Schäden durch Gewitter oder etwaiger Über- bzw. Unterspannung des Stromnetzes, indem Sie das Gerät von der Stromzufuhr trennen -Das Gerät sollte nicht direkter Sonneneinstrahlung oder anderen Wärmequellen ausgesetzt werden -Stress und Hektik bestimmen unseren Lebensalltag. Sollten Sie einmal durch das Lesen von Gebrauchsanweisungen, Verbraucherhinweisen und EU-Richtlinien gestresst sein, versuchen Sie, durch einen längeren Aufenthalt in der Natur neue Kraft zu tanken. Empfehlung: Waldspaziergang, Sonnenbad, Urlaub -Lesen Sie Aphorismen von Arthur Schopenhauer und sinnieren Sie darüber General safety instructions -Read the operating instructions carefully before using the device -Use a power supply with single isolated connections suitable for the device -Keep the operating instructions for the device carefully -Only use the device for its intended purpose -The device must not be exposed to water, moisture or extreme temperatures under any circumstances -Turn all controls on the device to the minimum setting before using it -Keep the device out of the reach of children Electrical safety -Make sure that the device is designed for the voltage in your power supply -Use either the included power supply or a power supply with single isolated connections recommended by product specialists -If the device is not used for a longer period of time, it should be disconnected from the power supply -If the power cable is damaged, do not use the device -Repairs of the power supply or the device itself should only be carried out by specialists -If the device has come into contact with liquids, there is a risk of electric shock Notes on repairs -Repairs must be carried out by qualified personnel -Opening the device by yourself or attempting to repair it may result in serious injuries or damage to the device and will void any warranty claims -In case of malfunctions or defects, contact an authorized service technician or the seller Warnings -Do not open the device. It does not contain any parts that can be serviced by the user -Existing ventilation slots on the device must never be blocked due to risk of overheating and damage -Do not use the device near easily flammable materials or liquids -Attention of thunder and lightning: Avoid damaging the device by means of voltage irregularities in the power grid by disconnecting the device from the power supply -The device should not be exposed to direct sunlight or other heat sources -Should you ever find yourself stressed by reading instructions for use, consumer information and EU guidelines, try to recharge your batteries by spending some time in nature. We recommend: A walk in the park, a step in the dark – try getting away by escaping today -Remember: When you’re alone and life is making you lonely you can always go downtown -And finally: Wake up you sleepy head. Put on your shoes, shake up your bed Importiert von / Imported by: Cotton Musical Supply Vordergasse 15 35510 Butzbach Germany info@cms-music.de www.cms-music.net Hersteller / Manufacturer: Disaster Area Designs LLC 2018 Garner Station Blvd 27603 Raleigh NC USA Mail: shipping@disasterareadesigns.com www.disasterareadesigns.com

Disaster Area Designs DPC-8EZ GEN3 8-Loop Pedalboard Controller with MIDI

DPC-8EZ GEN3 8-Loop Pedalboard Controller with MIDI The DPC-8EZ is a compact pedalboard control system with eight effects loops and MIDI. The DPC-8EZ is similar to our popular DPC-5 pedalboard controller but has more effects loops and a simplified MIDI implementation. The DPC-8EZ is fully compatible with the Disaster Area Gen2 pedal controllers, including the DMC-6D and DMC-7D. Combining a DPC-8EZ with a DMC-7D allows the player to use the DMC-7D as a powerful preset organizer and MIDI controller, while leaving the DPC-8EZ in direct access mode for quick pedal selection. Please note that in order to pack the maximum connectivity into the DPC-8EZ, the jack spacing is very tight. We have tested several different brands and types of patch cables and have found the George L’s and Lava kits to be the best solution for cabling up a DPC-8EZ. 20 plugs are required to cable 5 effects into a DPC-5. Disaster Area Designs is an authorized dealer for both types of cable kit, and they are available through our online store. We have several customers using the Switchcraft 380 plugs for custom cable harnesses as well. Disaster Area DPC-8ET Gen3 Features: -Compact size – 10″ x 2.6″ x 2″ excluding switch caps and jacks. -No special power supply required – uses less than 120mA, 9V from a Pedal Power 2 or similar. -5 footswitches for preset selection or manual effects loop control. -48 presets accessible by foot, arranged in four folders with three banks of four presets each. -128 presets accessible using an external MIDI controller -Full MIDI control of presets and effects loops -8 effects loops with a custom-designed switching matrix -Dedicated insert connection between loops 4 and 5 -Always-on tuner out with tuner mute. -New Z-MODE buffer allows you to tailor the impedance to work pefectly with fuzz, vibe, wah, and other impedance-sensitive pedals -USB connector for future firmware upgrades (PC and Mac firmware update tools available.) DPC-8EZ Gen3 Modes of Operation: Preset Mode: Button 1-4: Select a preset. Tap the current preset for bypass. Button 5: Change preset banks. Hold to enter direct access mode. Special Functions: Button 1: Hold for tuner mute Button 2: Hold to select folder 1-4 Direct Access Mode: Button 1-4: Select loops 1-4 (blue bank) or loops 5-8 (green bank.) Button 5: Change loop banks (1-4 or 5-8.) Hold to enter preset mode. Special Functions: Button 1: Hold for Tuner Mute Button 4: Hold to save the current loop settings to a preset Configuration Options: Hold Buttons at boot to change settings. Buttons 1+5: Factory Reset Buttons 1+4: Reset config only (retains presets) Buttons 1+2: Firmware Update Mode Button 1: Enable MIDI channel learning / autoconfig. Works with DMC-6D / 7D, DPC-5 as master Button 2: Change startup mode. DPC-8EZ starts in either preset mode or direct access mode Button 3: Enable / disable Stereo Link Button 4: Change MIDI output from THRU to MERGE. DPC-8EZ sends program changes in MERGE mode. Button 5: Enable or disable Automatic Noise Reduction. AMR mutes the output while switching to eliminate pops or clicks. Bedienungsanleitung

Preise inkl. der gesetzlichen MwSt. Satzfehler und Irrtümer vorbehalten. Lieferung von Ware am Lager solange Vorrat reicht. Preise in Euro zzgl. Versandkosten. © Frank Post, Bruchwiesenstrasse 25, D-66111 Saarbrücken, Telefon 0049(0)681-5898564, Email info AT loopersparadise de

Page built in 0.180 Sec.