Empress Tape Delay

Tape Delay Rich, lush tape delay in an incredibly small box. 3 flavors of tape age let you choose how dark and gritty the repeats will get. Filter and modulation controls allow for even more fine tuning. Killer Sound Quality - The Signal to Noise ratio is around 103 dB. Empress Tape Delay Features: -Tap Tempo with Ratios - Use tap tempo to set the Tape Delays speed; the ratio selection makes fast tempos and triplet based phase times easy. -True Bypass and Trails. - The Empress Tape Delay Pedal employs true bypass, or you can choose to use buffered bypass with trails. -Small Size - The enclosure measures approximately 4.5" by 3.5" by 1.5", which is delightfully small when considering all the features packed into this unit. -Analog Dry - The dry signal path is all analog. -Advanced Configuration - let you customize the tape delay to suit your needs. -Blips - Activate blips to get crazy sounds when you move the tape head around while playing -Presets - Advanced configuration allow you to run with 0, 2 or 3 presets -Relay Bypass - Using a relay for bypass means quieter switching and, if the pedal loses power, your signal will still pass unharmed. -Filter - Hi pass or low pass the delayed signal. -Modulation - Add a little or a lot of modulation, or none at all! The Empress Tape Delay Pedal runs on standard 9V negative tip DC power, but can safely accept up to 18V. It draws about 280mA. Power Input Voltage 9 - 18 V DC (Negative tip) Power Input Connector 2.1mm barrel connector (Negative tip) Power Consumption ~280mA Enclosure Material Die Cast Aluminum Input connector 1/4" Jack Output connector 1/4" Jack Height (Enclosure only) 1.5"Height (including controls) 2"Length 3.5"Width 4.5"weight 1 lb Input Impedance 1Meg Output Impedance 1K Frequency Response (-3dB) 8Hz - 18.5kHz Input Headroom +10.8dBu Output Headroom +10.2dBu Distortion 0.40% Signal to Noise 102.7dB Delay Time 5ms - 2.8s User manual