Send email   Tel. 0049 681 5898 564   My account  Shipment cost   cart 0,00


 TUNA FUZZ
Artikel bestellen

Beetronics

TUNA FUZZ

Art.Nr. 4045

€ 99,00

incl vat plus shipment


Shipment cost nationwide (Germany) € 5,90
shipment cost international

in stock


cart
Herstellerinformation
English Version below. Allgemeine Sicherheitshinweise • Bevor Sie das Gerät in Betrieb nehmen drehen Sie bitte alle Regler auf Minimum bzw. auf „Null“. • Lesen Sie die Bedienungsanleitung sorgfältig durch, bevor Sie das Gerät in Betrieb nehmen. • Bewahren Sie die Bedienungsanleitung für zukünftige Referenz auf. •Verwenden Sie das Gerät nur für den vorgesehenen Zweck. • Halten Sie das Gerät von Wasser, Feuchtigkeit und extremen Temperaturen fern. • Bewahren Sie das Gerät außerhalb der Reichweite von Kindern auf. Elektrische Sicherheit • Vergewissern Sie sich, dass die Netzspannung mit den Angaben auf dem Gerät übereinstimmt. •Verwenden Sie nur das mitgelieferte Netzteil oder ein gleichwertiges, von einem Fachmann empfohlenes Netzteil. • Ziehen Sie den Netzstecker, wenn das Gerät längere Zeit nicht benutzt wird. • Schützen Sie das Netzkabel vor Beschädigungen. • Verwenden Sie das Gerät nicht, wenn das Netzkabel beschädigt ist. • Vermeiden Sie den Kontakt des Geräts mit Wasser oder anderen Flüssigkeiten, um das Risiko eines elektrischen Schlages zu minimieren. Hinweise zur Reparatur • Reparaturen dürfen nur von qualifiziertem Fachpersonal durchgeführt werden. • Versuchen Sie nicht, das Gerät selbst zu öffnen oder zu reparieren, da dies zu schweren Verletzungen oder Schäden am Gerät führen kann. • Bei Funktionsstörungen oder Defekten wenden Sie sich an einen autorisierten Service-Techniker oder an uns. info@effekt-boutique.de Warnhinweise • Öffnen Sie das Gerät nicht. Es enthält keine vom Benutzer zu wartenden Teile. • Stellen Sie sicher, dass die Lüftungsschlitze des Geräts nicht blockiert sind, um Überhitzung zu vermeiden. • Verwenden Sie das Gerät nicht in der Nähe von entflammbaren Materialien oder Flüssigkeiten. • Ziehen Sie bei Gewitter oder längeren Betriebspausen den Netzstecker, um mögliche Schäden durch Spannungsspitzen zu vermeiden. • Setzen Sie das Gerät nicht direkter Sonneneinstrahlung oder anderen Wärmequellen aus. • Essen Sie keinen gelben Schnee English General safety instructions • Before you start using the device, please turn all controls to minimum or “zero”. • Read the operating instructions carefully before using the device. • Save the instruction manual for future reference. •Use the device only for its intended purpose. • Keep the device away from water, moisture and extreme temperatures. • Keep the device out of the reach of children. Electrical safety • Make sure that the mains voltage matches the information on the device. •Use only the included power adapter or an equivalent power adapter recommended by a professional. • Unplug the device if the device is not going to be used for a long period of time. • Protect the power cord from damage. • Do not use the device if the power cord is damaged. • Avoid contact of the device with water or other liquids to minimize the risk of electric shock. Repair instructions • Repairs may only be carried out by qualified specialist personnel. • Do not attempt to open or repair the device yourself as this may result in serious injury or damage to the device. • In the event of malfunctions or defects, contact an authorized service technician or us. info@effekt-boutique.de Warnings • Do not open the device. It contains no user-serviceable parts. • Make sure the device's ventilation slots are not blocked to avoid overheating. • Do not use the device near flammable materials or liquids. • During thunderstorms or long breaks in operation, pull out the power plug to avoid possible damage caused by voltage peaks. • Do not expose the device to direct sunlight or other heat sources. • Don't eat yellow snow Hersteller / Manufacterer: Beetronics LLC 14444 Benefit Street APT 4 CA 91423 Sherman Oaks United States (+1) 323 975 71 19 contact@beetronicsfx.com www.beetronicsfx.com Imported by Face BV Hoek 76 Unit 301 2850 Boom Belgium (+32) 3 844 67 97 info@face-be.eu www.face-be.eu

Beetronics TUNA FUZZ

TUNA FUZZ FLAVORFUL FUZZ LIKE NO OTHER Hook the ultimate guitar tone with the Tuna Fuzz! Housed in an iconic tuna can, this pedal delivers stinking good sounds inspired by our favorite vintage fuzz boxes. The single STINKER control dials in the master volume, ensuring your tone stands out like a bee in a tuna can. Inside, you'll find a bee-autiful Tunabee-shaped PCB, a hallmark of Beetronics' design, visible through the transparent back cover. This is the perfect pedal for anyone looking for a stinking good fuzz. THE SIGNATURE BEETRONICS TONE Inspired by vintage fuzz tones, the Tuna Fuzz delivers a rich and dynamic tone. COOLEST PEDAL ON THE BOARD What could bee cooler than stomping on a tuna can and making rad sounds? Our artisan bees made sure that the Tuna Fuzz is accessible to every guitar player in the world. Our artisan bees have sourced real tuna cans, and every can is hand-drilled right here in our hive. Don’t worry—no fish has ever been in these cans, and yes, the pedal is 100% vegan! The Tuna Fuzz is a 3-transistor fuzz that shares some similarities with the Octahive, but the tone can be quite different. The Tuna has a lot of volume and is very dynamic, delivering a sound that’s impressively close to vintage fuzzes. It also cleans up real nice. While the STINKER knob works as a master volume, the Tuna Fuzz cleans up real nice by using your guitar’s volume knob as a gain control. Just experiment with rolling back your guitar’s volume, and you’ll bee able to see how nice and dynamic this fuzz is. While many of our circuits have no issues with buffers, we don’t recommend using a buffer before the Tuna Fuzz. That said, your best choice is to trust your ears—if it sounds good to you, it’s good! True Bypass? - Yezzzzz! Yes, the can is strong enough for you to stomp on without worry. While we wouldn’t recommend running a car over it, it should hold up just fine for normal gigs. The PCB is designed with most components mounted to it, preventing loose jacks or parts, and helping to make the enclosure extra rigid. Needs: 9VDC 50mA Center Negative

Prices plus VAT. Printing errors reserved. Delivery as long as item is in stock.

Page built in 0.124 Sec.