RedSeven Mini Line Mixer

Mini Line Mixer Double Stereo Line Mixer is a line level professional device for parallel processing, with a fixed mix of 50/50 (dry/wet). Thought as the ultimate and most compact solution in the business to mix up to two stereo returns with incoming dry signal into a single stereo output. To avoid any ground loop issue, sends and returns are transformer isolated. The whole unit can operate at nominal +4db line level signal. Left Side -INPUT (mono): this is the main input of the mixer, mono. -OUT LEFT (mono): left output of the system. If only the left output is used (right output is not plugged in) the mixer will sum right and left into this output). -OUT LEFT (stereo): right output of the system. If right output is plugged in, the stereo signal will be preserved as left and right on respective outputs. Right Side -SEND: this output will split incoming signal from INPUT to other two equal copy. If you use a mono connector, you will have one outgoing signal (on TIP), if you use a stereo connector you will have two equal copies of INPUT signal (first one on TIP, second one on RING). -FX1 RETURN: this input will accommodate the mono or stereo return of your first effect. If you’re using a mono effect, a mono cable will work, if you’re using a stereo output from your effect you must use a Y cable to accommodate left and right signal into FX1 RETURN jack. -FX2 RETURN: this input will accommodate the mono or stereo return of your second effect. If you’re using a mono effect, a mono cable will work, if you’re using a stereo output from your effect you must use a Y cable to accommodate left and right signal into FX2 RETURN jack Manual Needs: 9VDC 100mA Center Negative