Send email   Tel. 0049 681 5898 564   My account  Shipment cost   cart 0,00


 Proteus
Artikel bestellen

SubDecay

Proteus

Art.Nr. 2303

€ 239,00

incl vat plus shipment


Shipment cost nationwide (Germany) € 5,90
shipment cost international

in stock


cart
Herstellerinformation
Allgemeine Sicherheitshinweise -Lesen Sie vor der Inbetriebnahme des Geräts die Bedienungsanleitung sorgfältig durch -Verwenden Sie eine für das Gerät geeignete Stromversorgung mit einzelgalvanischer Trennung -Bewahren Sie die Bedienungsanleitung für das Gerät sorgfältig auf -Verwenden Sie das Gerät nur für den dafür vorgesehenen Zweck -Das Gerät darf auf keinen Fall Wasser, Feuchtigkeit und extremen Temperaturen ausgesetzt werden -Drehen Sie alle Regler am Gerät vor der Inbetriebnahme auf die jeweilige Minimaleinstellung -Bewahren Sie das Gerät außerhalb der Reichweite von Kindern auf Elektrische Sicherheit -Vergewissern Sie sich, dass das Gerät für die Spannung in Ihrem Stromnetz ausgelegt ist -Verwenden Sie entweder das mitgelieferte Netzteil oder eine gleichwertige, von Fachleuten empfohlene Stromversorgung mit einzelgalvanischer Trennung -Bei längerer Nichtbenutzung sollte das Gerät von der Stromzufuhr getrennt werden -Bei Beschädigungen des Netzkabel ist von einer Benutzung des Gerätes abzusehen -Reparaturen am Netzkabel, der Stromzufuhr oder dem Gerät selbst dürfen ausschließlich von geschultem Fachpersonal durchgeführt werden -Sollte das Gerät mit Flüssigkeiten in Kontakt gekommen sein, besteht das Risiko eines elektrischen Schlages Hinweise zur Reparatur -Reparaturen dürfen ausschließlich von qualifiziertem Fachpersonal durchgeführt werden -Selbständiges Öffnen oder der Versuch einer Reparatur des Geräts führt kann eventuell zu schweren Verletzungen oder Schäden am Gerät führen und hat zur Folge, dass die Garantieleistung erlischt -Wenden Sie sich bei Funktionsstörungen oder Defekten an einen autorisierten Service-Techniker oder an den Verkäufer Warnhinweise -Öffnen Sie das Gerät nicht. Es enthält keine vom Benutzer zu wartenden Teile -Vorhandene Lüftungsschlitze am Gerät dürfen nicht blockiert sein, da ansonsten eine Überhitzung des Geräts und etwaige Folgeschäden drohen -Verwenden Sie das Gerät nicht in der Nähe von leicht entflammbaren Materialien oder Flüssigkeiten -Vermeiden Sie Schäden durch Gewitter oder etwaiger Über- bzw. Unterspannung des Stromnetzes, indem Sie das Gerät von der Stromzufuhr trennen -Das Gerät sollte nicht direkter Sonneneinstrahlung oder anderen Wärmequellen ausgesetzt werden -Stress und Hektik bestimmen unseren Lebensalltag. Sollten Sie einmal durch das Lesen von Gebrauchsanweisungen, Verbraucherhinweisen und EU-Richtlinien gestresst sein, versuchen Sie, durch einen längeren Aufenthalt in der Natur neue Kraft zu tanken. Empfehlung: Waldspaziergang, Sonnenbad, Urlaub -Lesen Sie Aphorismen von Arthur Schopenhauer und sinnieren Sie darüber General safety instructions -Read the operating instructions carefully before using the device -Use a power supply with single isolated connections suitable for the device -Keep the operating instructions for the device carefully -Only use the device for its intended purpose -The device must not be exposed to water, moisture or extreme temperatures under any circumstances -Turn all controls on the device to the minimum setting before using it -Keep the device out of the reach of children Electrical safety -Make sure that the device is designed for the voltage in your power supply -Use either the included power supply or a power supply with single isolated connections recommended by product specialists -If the device is not used for a longer period of time, it should be disconnected from the power supply -If the power cable is damaged, do not use the device -Repairs of the power supply or the device itself should only be carried out by specialists -If the device has come into contact with liquids, there is a risk of electric shock Notes on repairs -Repairs must be carried out by qualified personnel -Opening the device by yourself or attempting to repair it may result in serious injuries or damage to the device and will void any warranty claims -In case of malfunctions or defects, contact an authorized service technician or the seller Warnings -Do not open the device. It does not contain any parts that can be serviced by the user -Existing ventilation slots on the device must never be blocked due to risk of overheating and damage -Do not use the device near easily flammable materials or liquids -Attention of thunder and lightning: Avoid damaging the device by means of voltage irregularities in the power grid by disconnecting the device from the power supply -The device should not be exposed to direct sunlight or other heat sources -Should you ever find yourself stressed by reading instructions for use, consumer information and EU guidelines, try to recharge your batteries by spending some time in nature. We recommend: A walk in the park, a step in the dark – try getting away by escaping today -Remember: When you’re alone and life is making you lonely you can always go downtown -And finally: Wake up you sleepy head. Put on your shoes, shake up your bed Importiert von / Imported by: Cotton Musical Supply Vordergasse 15 35510 Butzbach Germany info@cms-music.de www.cms-music.net Hersteller / Manufacturer: Subdecay studios inc. www.subdecay.com 001 503 538 3632

SubDecay Proteus

Proteus Envelope and Sample Hold Filter The Proteus mkII – Our plug and play filter, with a new design closely related to the original Filter Sample/Hold. The resonance control adds a new dimension to the effect that goes from subtle to greasy gritty synth tones. We also added an external switch allowing you to change from low-pass to band-pass filter. The all analog filter with digital magic. Old school analog tech still rules in the world of filter effects. At the heart of this pedal is an analog OTA based filter design similar to vintage Maestro units. The digital portion of this pedal is used purely for controlling the analog circuit. This gives you old school analog tone with modern features like tap tempo and switching between the envelope filter and sample hold filter on the fly. The Proteus does the thinking and tinkering for you so you can get busy playing your guitar. Controls: Tap/Mode Switch: Tapping the switch 2-4 times starts the tap tempo random arpeggiator (sample/hold.) Holding the switch down for one second reverts back to envelope filter mode. Frequency: Filter resting point. Depth: Filter modulation range for both envelope follower and sample hold mode. 1-2-4: Step multiplier. One, two or four steps per beat (or quarter, eighth and sixteenth notes.) Used for sample hold mode only. LP – BP: Select low-pass or band-pass filter. Bypass Switch: Turns the effect off or on. Dual color LED: Lights up green when the effect is on. Red indicates the modulation of the filter letting you know if it’s in envelope or sample/hold mode even when the filter is bypassed. Improvements / changes from the original Proteus: Switchable bandpass and lowpass filter. New design closer to the Maestro Filter Sample Hold. Can be powered at up to 18 volts for maximum headroom. Resonance knob added allows the filter to go from subtle to nasty greasy synthesizer grit. About the Proteus Auto Filter: Powered by an external regulated 9VDC to 18VDC adapter with a negative center 2.1mm barrel style plug. Power supply is not included and can not be powered by a battery If using a “daisy chain” power supply all other pedals MUST be negative ground. Current draw is less than 25mA. Length 2.3 X Width 4.4 X Height 1.0 Input impedance- 200K Output impedance- Less than 1K. The Proteus is handmade in Oregon. Die cast metal enclosures for durability. 3PDT switches for true bypass switching. Red/Green LED indicator.

Prices plus VAT. Printing errors reserved. Delivery as long as item is in stock.

Page built in 0.163 Sec.