Barber Electronics FUGGEDABOUTIT

FUGGEDABOUTIT The Fuggedaboutit pedal was designed to overdrive, condition, or boost your signal before vintage amps other pedals, and amp simulators. The Volume control sets the output level, any setting on this control is useable, but most will fall between 9 o clock and 1 o clock for unity gain. The tone control sets the oberall brightness and tightness, but it also increases gain a bit as it is turned up. Most users will find 11 o clock to 3 o clock to be the sweet spot, but again, anything works here. Low setting have lots of weight and keep the pedal a low gain affair. The Gain control sets the sustain and harmonic content. Truly anything goes on the gain control, and I recommend you explore the range with your different guitars and amps. Boost an amp by setting the gain very iow and the volume high can have exceptional results, while using higher gain settings and then keeping the output at unity can be the ticket with you need to control volume and have a switcheable clean sound. The left toggle chooses between stock bess content and enhanced bass. When boosting amps the stock setting with keep things tight, and when playing at unity and letting the Fuggedaboutit carry the OD sound the enhanced bass is often a good choice, it can also work miricles with that Strat Bridge pickup. The right toggles chooses the symmetry and picking dynamics. Set to the left, you have the stock setting, this is assymmetric, many peole feel this is the tweed sound, and blends really well with cranked vintage amps. Set to the right, you get the dynamic attack setting, this is smoother and punchier, which works when you need to push smooth gain and operate at unity gain into a clean amp. Benötigt: 9VDC 50mA Center Negativ