Email senden   Tel. 0049 681 5898 564   Mein Konto  Versandkosten   Einkaufswagen 0,00


 DMC.micro Gen4
Artikel bestellen

Disaster Area Designs

DMC.micro Gen4

Art.Nr. 3390

€ 199,00

inkl. ges. MwSt., zzgl. Versandkosten


Versand Inland (Germany) € 5,90
Versandkosten international

Lieferung auf Anfrage


Einkaufswagen
Herstellerinformation
Allgemeine Sicherheitshinweise -Lesen Sie vor der Inbetriebnahme des Geräts die Bedienungsanleitung sorgfältig durch -Verwenden Sie eine für das Gerät geeignete Stromversorgung mit einzelgalvanischer Trennung -Bewahren Sie die Bedienungsanleitung für das Gerät sorgfältig auf -Verwenden Sie das Gerät nur für den dafür vorgesehenen Zweck -Das Gerät darf auf keinen Fall Wasser, Feuchtigkeit und extremen Temperaturen ausgesetzt werden -Drehen Sie alle Regler am Gerät vor der Inbetriebnahme auf die jeweilige Minimaleinstellung -Bewahren Sie das Gerät außerhalb der Reichweite von Kindern auf Elektrische Sicherheit -Vergewissern Sie sich, dass das Gerät für die Spannung in Ihrem Stromnetz ausgelegt ist -Verwenden Sie entweder das mitgelieferte Netzteil oder eine gleichwertige, von Fachleuten empfohlene Stromversorgung mit einzelgalvanischer Trennung -Bei längerer Nichtbenutzung sollte das Gerät von der Stromzufuhr getrennt werden -Bei Beschädigungen des Netzkabel ist von einer Benutzung des Gerätes abzusehen -Reparaturen am Netzkabel, der Stromzufuhr oder dem Gerät selbst dürfen ausschließlich von geschultem Fachpersonal durchgeführt werden -Sollte das Gerät mit Flüssigkeiten in Kontakt gekommen sein, besteht das Risiko eines elektrischen Schlages Hinweise zur Reparatur -Reparaturen dürfen ausschließlich von qualifiziertem Fachpersonal durchgeführt werden -Selbständiges Öffnen oder der Versuch einer Reparatur des Geräts führt kann eventuell zu schweren Verletzungen oder Schäden am Gerät führen und hat zur Folge, dass die Garantieleistung erlischt -Wenden Sie sich bei Funktionsstörungen oder Defekten an einen autorisierten Service-Techniker oder an den Verkäufer Warnhinweise -Öffnen Sie das Gerät nicht. Es enthält keine vom Benutzer zu wartenden Teile -Vorhandene Lüftungsschlitze am Gerät dürfen nicht blockiert sein, da ansonsten eine Überhitzung des Geräts und etwaige Folgeschäden drohen -Verwenden Sie das Gerät nicht in der Nähe von leicht entflammbaren Materialien oder Flüssigkeiten -Vermeiden Sie Schäden durch Gewitter oder etwaiger Über- bzw. Unterspannung des Stromnetzes, indem Sie das Gerät von der Stromzufuhr trennen -Das Gerät sollte nicht direkter Sonneneinstrahlung oder anderen Wärmequellen ausgesetzt werden -Stress und Hektik bestimmen unseren Lebensalltag. Sollten Sie einmal durch das Lesen von Gebrauchsanweisungen, Verbraucherhinweisen und EU-Richtlinien gestresst sein, versuchen Sie, durch einen längeren Aufenthalt in der Natur neue Kraft zu tanken. Empfehlung: Waldspaziergang, Sonnenbad, Urlaub -Lesen Sie Aphorismen von Arthur Schopenhauer und sinnieren Sie darüber General safety instructions -Read the operating instructions carefully before using the device -Use a power supply with single isolated connections suitable for the device -Keep the operating instructions for the device carefully -Only use the device for its intended purpose -The device must not be exposed to water, moisture or extreme temperatures under any circumstances -Turn all controls on the device to the minimum setting before using it -Keep the device out of the reach of children Electrical safety -Make sure that the device is designed for the voltage in your power supply -Use either the included power supply or a power supply with single isolated connections recommended by product specialists -If the device is not used for a longer period of time, it should be disconnected from the power supply -If the power cable is damaged, do not use the device -Repairs of the power supply or the device itself should only be carried out by specialists -If the device has come into contact with liquids, there is a risk of electric shock Notes on repairs -Repairs must be carried out by qualified personnel -Opening the device by yourself or attempting to repair it may result in serious injuries or damage to the device and will void any warranty claims -In case of malfunctions or defects, contact an authorized service technician or the seller Warnings -Do not open the device. It does not contain any parts that can be serviced by the user -Existing ventilation slots on the device must never be blocked due to risk of overheating and damage -Do not use the device near easily flammable materials or liquids -Attention of thunder and lightning: Avoid damaging the device by means of voltage irregularities in the power grid by disconnecting the device from the power supply -The device should not be exposed to direct sunlight or other heat sources -Should you ever find yourself stressed by reading instructions for use, consumer information and EU guidelines, try to recharge your batteries by spending some time in nature. We recommend: A walk in the park, a step in the dark – try getting away by escaping today -Remember: When you’re alone and life is making you lonely you can always go downtown -And finally: Wake up you sleepy head. Put on your shoes, shake up your bed Importiert von / Imported by: Cotton Musical Supply Vordergasse 15 35510 Butzbach Germany info@cms-music.de www.cms-music.net Hersteller / Manufacturer: Disaster Area Designs LLC 2018 Garner Station Blvd 27603 Raleigh NC USA Mail: shipping@disasterareadesigns.com www.disasterareadesigns.com

Disaster Area Designs DMC.micro Gen4

DMC.micro Gen4 Micro-Sized MIDI Controller The DMC.micro Gen4 is the first in a new generation of MIDI controllers. Featuring all of the features of the previous DMC.micro Pro and DMC.micro Classic, with a vastly improved USB controller and a dual-core 32 bit processor, the DMC.micro Gen4 is maximum MIDI in a minimum footprint. Overview The DMC.micro Gen4 uses our advanced MIDI technology in a tiny package – just 3.6″ x 1.5″ x 1.6″ (93 x 38 x 42mm.) The DMC.micro user interface is incredibly simple – tap the left or right buttons to perform an action, hold the left button to perform a third “alternate” action, or hold the right button to advance to the next “page.” The DMC.micro Gen4 can access up to eight pages, whose functions may include: Device Control: Program select and bypass for up to four devices. Utility Mode X: User-set actions on left / right / alt buttons. Utility Mode Y: User-set actions on left / right / alt buttons. This mode is also assignable to looper controls for the Strymon Timeline, Eventide H9 / Timefactor, HX Stomp / Effects, or Line 6 M9/M13. Preset: Stores programs from Device Control pages and allows the user to change multiple devices at once. Clock: Control the DMC.micro Gen4’s built-in MIDI clock generator Web-based editor: Completely configure the entire controller, set preset names, re-order presets, import and export controller settings. Features: -Graphical OLED display shows preset names, device status, clock rate, and more. -One MultiJack connector can function as Expression Pedal input, Tap Tempo Output, Function Switch Output, Footswitch Input, or MIDI Output. -Internal DIP switches to customize MultiJack functions. -Up to 99 user-accessible presets (if preset page is active.) -Controls up to four MIDI devices -User-definable Utility Mode X page sends any MIDI CC command, MIDI notes, bank up and down, more. -New Utility Mode Y page adds additional user-defined commands or use as looper control mode -USB Type-C port for power, USB MIDI, or firmware updates -USB Type-A port for dedicated USB MIDI HOST, connect to most class-compliant USB MIDI devices -Runs on 5V USB or standard 9V power, 40mA or higher -The DMC.micro Gen4 also features our astounding MultiJack connector, which can perform several different functions to simplify your setup! -Connect one or two 1/4″ MIDI devices from companies such as Alexander Pedals, Chase Bliss Audio, Empress, and Meris -Functions as a bi-directional MIDI port for supported devices, allows connections for Meris pedals to editing software. -Connect an expression pedal to send MIDI messages to one or more of your devices, or user-define a custom MIDI CC expression command. -Connect an external one- or two-button footswitch for tap tempo control, or user-define two custom actions. -Send tap tempo to an external device such as a DD-7, Panther Cub, Flint, and more. -Need more control? Use the USB port to interface with your computer or tablet device and turn the DMC.micro into a USB MIDI controller. Maybe you have a Zoom MultiStomp (MS-50G / MS-60B / MS-70CDR?) or a newer Red Panda pedal? Connect it to the USB Host port to control it just like a normal MIDI device. -Want to interface your DAW or tablet to your pedalboard wirelessly? Connect a CME Widi Bud Pro to the USB Host port for bi-directional MIDI communication over Bluetooth. -You can even chain multiple MIDI controllers together through the USB Host port, to create one seamless integrated control station. Specifications: Size: 3.6″ x 1.5″ x 1.6″ (93 x 38 x 42mm.) 5-pin MIDI Port (supports MIDI input with MIDI-Y cable) MultiJack USB port Controls up to four MIDI devices Power: 9V DC, 40mA or greater, center negative (not included) OR USB 5V, 100mA Graphical OLED display Soft-touch footswitches Preset, device, looper, and UTIL modes Benötigt: 9VDC 50mA Center Negativ

Preise inkl. der gesetzlichen MwSt. Satzfehler und Irrtümer vorbehalten. Lieferung von Ware am Lager solange Vorrat reicht. Preise in Euro zzgl. Versandkosten. © Frank Post, Bruchwiesenstrasse 25, D-66111 Saarbrücken, Telefon 0049(0)681-5898564, Email info AT loopersparadise de

Page built in 0.155 Sec.