Email senden   Tel. 0049 681 5898 564   Mein Konto  Versandkosten   Einkaufswagen 0,00


 MIDI Driver
Artikel bestellen

The GigRig

MIDI Driver

Art.Nr. 2374

€ 169,00

inkl. ges. MwSt., zzgl. Versandkosten


Versand Inland (Germany) € 5,90
Versandkosten international

Auf Lager


Einkaufswagen
Herstellerinformation
Allgemeine Sicherheitshinweise -Lesen Sie vor der Inbetriebnahme des Geräts die Bedienungsanleitung sorgfältig durch -Verwenden Sie eine für das Gerät geeignete Stromversorgung mit einzelgalvanischer Trennung -Bewahren Sie die Bedienungsanleitung für das Gerät sorgfältig auf -Verwenden Sie das Gerät nur für den dafür vorgesehenen Zweck -Das Gerät darf auf keinen Fall Wasser, Feuchtigkeit und extremen Temperaturen ausgesetzt werden -Drehen Sie alle Regler am Gerät vor der Inbetriebnahme auf die jeweilige Minimaleinstellung -Bewahren Sie das Gerät außerhalb der Reichweite von Kindern auf Elektrische Sicherheit -Vergewissern Sie sich, dass das Gerät für die Spannung in Ihrem Stromnetz ausgelegt ist -Verwenden Sie entweder das mitgelieferte Netzteil oder eine gleichwertige, von Fachleuten empfohlene Stromversorgung mit einzelgalvanischer Trennung -Bei längerer Nichtbenutzung sollte das Gerät von der Stromzufuhr getrennt werden -Bei Beschädigungen des Netzkabel ist von einer Benutzung des Gerätes abzusehen -Reparaturen am Netzkabel, der Stromzufuhr oder dem Gerät selbst dürfen ausschließlich von geschultem Fachpersonal durchgeführt werden -Sollte das Gerät mit Flüssigkeiten in Kontakt gekommen sein, besteht das Risiko eines elektrischen Schlages Hinweise zur Reparatur -Reparaturen dürfen ausschließlich von qualifiziertem Fachpersonal durchgeführt werden -Selbständiges Öffnen oder der Versuch einer Reparatur des Geräts führt kann eventuell zu schweren Verletzungen oder Schäden am Gerät führen und hat zur Folge, dass die Garantieleistung erlischt -Wenden Sie sich bei Funktionsstörungen oder Defekten an einen autorisierten Service-Techniker oder an den Verkäufer Warnhinweise -Öffnen Sie das Gerät nicht. Es enthält keine vom Benutzer zu wartenden Teile -Vorhandene Lüftungsschlitze am Gerät dürfen nicht blockiert sein, da ansonsten eine Überhitzung des Geräts und etwaige Folgeschäden drohen -Verwenden Sie das Gerät nicht in der Nähe von leicht entflammbaren Materialien oder Flüssigkeiten -Vermeiden Sie Schäden durch Gewitter oder etwaiger Über- bzw. Unterspannung des Stromnetzes, indem Sie das Gerät von der Stromzufuhr trennen -Das Gerät sollte nicht direkter Sonneneinstrahlung oder anderen Wärmequellen ausgesetzt werden -Stress und Hektik bestimmen unseren Lebensalltag. Sollten Sie einmal durch das Lesen von Gebrauchsanweisungen, Verbraucherhinweisen und EU-Richtlinien gestresst sein, versuchen Sie, durch einen längeren Aufenthalt in der Natur neue Kraft zu tanken. Empfehlung: Waldspaziergang, Sonnenbad, Urlaub -Lesen Sie Aphorismen von Arthur Schopenhauer und sinnieren Sie darüber General safety instructions -Read the operating instructions carefully before using the device -Use a power supply with single isolated connections suitable for the device -Keep the operating instructions for the device carefully -Only use the device for its intended purpose -The device must not be exposed to water, moisture or extreme temperatures under any circumstances -Turn all controls on the device to the minimum setting before using it -Keep the device out of the reach of children Electrical safety -Make sure that the device is designed for the voltage in your power supply -Use either the included power supply or a power supply with single isolated connections recommended by product specialists -If the device is not used for a longer period of time, it should be disconnected from the power supply -If the power cable is damaged, do not use the device -Repairs of the power supply or the device itself should only be carried out by specialists -If the device has come into contact with liquids, there is a risk of electric shock Notes on repairs -Repairs must be carried out by qualified personnel -Opening the device by yourself or attempting to repair it may result in serious injuries or damage to the device and will void any warranty claims -In case of malfunctions or defects, contact an authorized service technician or the seller Warnings -Do not open the device. It does not contain any parts that can be serviced by the user -Existing ventilation slots on the device must never be blocked due to risk of overheating and damage -Do not use the device near easily flammable materials or liquids -Attention of thunder and lightning: Avoid damaging the device by means of voltage irregularities in the power grid by disconnecting the device from the power supply -The device should not be exposed to direct sunlight or other heat sources -Should you ever find yourself stressed by reading instructions for use, consumer information and EU guidelines, try to recharge your batteries by spending some time in nature. We recommend: A walk in the park, a step in the dark – try getting away by escaping today -Remember: When you’re alone and life is making you lonely you can always go downtown -And finally: Wake up you sleepy head. Put on your shoes, shake up your bed Importiert von / Imported by: Frank Post Bruchwiesenstr. 25 66111 Saarbrücken Germany Phone: 0049 681 5898564 Mail: info@loopersparadise.de Hersteller / Manufacturer: The GigRig Limited Unit 15 Whitehill Industrial Park Royal Wootton Bassett SN4 7DB United Kingdom ​Phone: 0044 (0)7947533014 Mail: support@thegigrig.com

The GigRig MIDI Driver

MIDI Driver Used in conjunction with TheGigRig G2 app, the MIDI Driver wirelessly connects your iOS device to G2. You can then display and edit patch names, back up all the settings on your G2 as well as operating your G2 remotely, all through the bluetooth on your IOS device What would I use the MIDI Driver for? The MIDI Driver allows you to connect your IOS device wirelessly to your G2 using TheGigRig MIDI + App. its also great if you need to use MIDI cables over a long distance, say 10m or more, as it will buffer the MIDI signal ensuring no degradation of the MIDI signal with long cables How do I connect to my IOS device In the MIDI + App, you'll see the settings button on the bottom right. Press this and you'll see the Bluetooth button. This will show you the M1 Bluetooth device in the list. Connect to this device. MIDI Driver comes in response to G2 users asking us for a way to display patch names on a screen, but we've done a lot more than that. Used in conjunction with our G2 MIDI + App, not only does your IOS device become the screen for your G2, you are also able to operate your G2 remotely, as well as – crucially – being able to store and recall an almost infinite number of preset/pedalboard configuration settings… all via an iOS device. ​ MIDI Driver connects to G2 via the MIDI ports (allowing further MIDI through connections if necessary). It connects wireless to your iOS device via the G2 App. ​ GigRig G2 MIDI+ is an iOS application available from Apple's App Store. It is a powerful CoreMIDI compliant MIDI event capture, librarian, cue display and event replay utility. It enables you to capture MIDI events from hardware, network or from other apps. Please see Apple's App Store for a full description. ​ Please note: at this point MIDI driver only works with iOS devices. Works with iOS MIDI Driver works with the G2 MIDI+ App, available from Apple's App Store Store & Recall Settings Maybe you want to create a library of settings… or maybe record and play back MIDI files, footpress intervals and so on Information On Screen Anything from patch names to defining textual+emoji cues… Lyrics? Song titles… CoreMIDI Compliant MIDI event capture, librarian, cue display and event replay utility User Manual

Preise inkl. der gesetzlichen MwSt. Satzfehler und Irrtümer vorbehalten. Lieferung von Ware am Lager solange Vorrat reicht. Preise in Euro zzgl. Versandkosten. © Frank Post, Bruchwiesenstrasse 25, D-66111 Saarbrücken, Telefon 0049(0)681-5898564, Email info AT loopersparadise de

Page built in 0.120 Sec.