LS10/6 Audio LooperRuf an - dann erkläre ich dir die Funktionen !! 0681-5898564 FEATURES:
MLC Audio Looper LS10/6 is equipped with 10 effect loops, 6 relay switches ground separated. LS10/6 is controlled by MIDI CC (Control Change) and MIDI PC (Program change) commands over 16 MIDI channels. LS10/6 is compatible with any type of MIDI controller capable of sending CC & PC commands, but to ensure proper operation and maximum effectiveness we recommend using MLC controllers.
...audio loopers for professional guitar systems!!!
Transparent sound with the best professional grade Burr Brown OPA line driver for zero loss of tone or touch dynamics. Silent switching and full MIDI compatibility. Tour grade construction, simple to setup and control.
perfectly transparent sound
signal to noise ration comparable to CD quality recording s(102dB)
no dynamic loss
silent, click-free switching, even in high gain level
MIDI compatibility, PC commands and CC commands
six relay contact closures (S1-S6) for devices utilizing switch to ground functions
high grade low noise line driver (BURR BROWN OPA Line Driver)
alternating or direct current operation
Handcrafted in Gdansk, Poland
LS10/6 is equipped with 10 effect loops, 6 switches ground separated. LS10/6 is controlled by MIDI PC ( Program Change ) and CC (Control Change) commands over 16 MIDI channels. LS10/6 is compatible with any type of MIDI controller capable of sending PC and CC commands, but to ensure proper operation and maximum effectiveness we recommend using MLC controllers.
The effects loop can be hooked up with:
10 mono effects (10 effects plugged in before the amplifier)
10 mono effects (10 effects plugged in the amplifier’s FX LOOP)
By dividing the loop into two sections we can plug in:
10 mono effects (6 before the amplifier and 4 in the amplifier’s FX LOOP)
The front panel consists of 18 LED diodes informing which loop (L1-L10) or which switch (S1-S6) is on and a MIDI light which informs if the device is receiving MIDI signals and Store
To connect audio through a high grade line buffer, connect to the JACK 6,3 mm GUITAR IN.
The rear panel consists of 6,3 mm ‘jack’ receptacles used for connecting effects, audio signals and control the amplifier and other devices:
LINK OUT - direct OUT (from front panel GUITAR IN)
INPUT 1 - effects loop 1-6 IN (without high impedance input buffer)
OUTPUT 1 - ffects loop 1-6 OUT (high impedance output buffer)
INPUT 2 - effect loop 7-10 IN
OUTPUT 2 - effects loop 7-10 OUT
TUNER OUT - ISO separated TUNER out
10 xSend - used for connecting the effect’s INPUT
10 x Return - used for connecting the effect’s OUTPUT
6 x Switch - used for controlling the amplifier channels, tone etc.
GND/LIFT - chasis ground lift switch
MIDI IN - used for communications with a midi controller
MIDI OUT THRU - MIDI thru out for additional device
MIDI CHANNEL - switch used for switching channel from 1 to 16
POWER IN - power supply socket for AC 9V/1A (AC Plug 2,5mm x 5,5mm)
EXT POWER IN - 9/12AC phantom power for Midi controller (AC Plug 2,5mm x 5,5mm)Technical Specification:
Power in: Power supply socket for AC 9VAC/1A
Plug 2,5 mm x 5,5 mm
Operational temperature: -15˚C / +50˚C
Height: 1U (44 mm) rack space
Width:19" (482 mm) rack space
Lenght: 185 mm
Weight: 1,5 kg / 3 pounds User Manual