Foxrox Electronics Wah Retrofit

Wah Retrofit The Foxrox Wah Retrofit is a self-contained JFET buffer/amp circuit that gets installed into your Wah Wah pedal, giving it the ability to cut through any Fuzz Face or Fuzz Face clone. By essentially installing a "real" output section, the Wah Wah pedal becomes immune to the effects of loading, restoring range and depth to older, vintage Wah Wah pedals without affecting their vintage value. Newer, high-end "boutique" wah pedals, such as Teese RMC pedals also benefit from this mod because they are based on the same, classic inductor-based circuit. Since it is a basic JFET audio buffer/amplifier, this circuit can also be added to effects pedals that need more output, as well as effects that need more drive at the input. NOTE: A Teese RMC wah with the Foxrox Wah Retrofit, going into a Captain Coconut (1 or 2) is guaranteed to deliver the best wah/fuzz/vibe/octave sounds you"ve ever heard! Connection wires: RED = +9 Volts DC; BLACK = Ground; White = Input; Blue = Output Volume: Trimmer offers continuous volume control with some available extra gain (around 6 dB). Some of the best Wah Wah pedals out there have an inherent boost that (without this mod) can"t be attenuated without affecting the sound of the Wah. The Foxrox Wah Retrofit makes it possible to add or cut the level without affecting the Wah pedal"s natural tone. It can also be built to give up to 15 dB of gain, available upon request. However, this is not recommended for Wah Wah pedals because of possible distortion during resonant peaks. Orders Include: The retrofit as shown above, installation instructions, mounting hardware, and technical support via e-mail. Installation Examples and Instructions: The FWR is easy to install, however, don"t attempt it unless you have decent soldering skills. Here are some examples to serve both as instructions, and as a way for you to decide if it"s something you can pull off. Click to view illustrations: Features: Dimensions Length = 2" Width = .62"Weight 3 oz. Voltage 9 Volts DC Current Draw 3mA Power Connection Connects to power in Wah pedal Signal Switching n/a User Manual